What Kind of Kit Plane Advice
|
| Is a Homebuilt Aircraft Project For You? Do you have the mental attitude needed to complete a homebuilt airplane? Is it more economical? Should you build or buy? |
| Tools and Tips These tools and tips have proven invaluable in the successful construction of my kitplane. |
| Assembly Order Your assembly order may very well be influenced by something particular with your building situation and circumstances. For example, I had to install the top skins and canopy long before I really wanted to so I could safely transport my project cross country. But if nothing else got in the way, what would be the perfect order? |
| RV-8 Tail Kit The Vans Tail Kit has really improved. The directions are straightforward and well written. This is the logical place to start your kit plane construction. |
| Wing Kit Advice for building the Wing Kit for a Vans RV-8. This could also prove valuable to builders of other Vans or aluminum kitplanes. |
| Fuselage Building the new match drilled fuselage is a much easier, quicker process than before. A lot of the hard parts to build, and difficult spots in the construction, have been fixed. This article gives specifics for the RV-8, but much of what is in here is applicable to other aircraft too. |
| Finishing Kit I think the real reason Vans made the Finishing Kit is the big bubble canopy. If they had shipped the canopy with the fuselage kit, I’m sure mine would have been scratched or damaged some kind of way before I was ready to install it. It was a good idea to make it a separate kit and send it at the end. There are of course a few other things in the kit, like brakes, wheels, and a lot of fiberglass. |
| Final Assembly In this section, I want to talk about the final assembly of the aircraft itself. In the other sections, I have discussed building the parts, now it is time to put them together. You could say this is the “Some Assembly Required” section. |
| Aircraft Electrical Systems Advice on the Aircraft Electrical Systems I installed in my Vans RV-8. Plus helpful hints, tips on dealing with trouble spots, and things I would do differently. Builders of other Vans kits, or other aluminum kits, will also find this useful. |
| Pitot Static System I used neoprene tube, connectors and rubber grommets for all of my pitot static system. I ran the tube from the back of the instruments, down the left gear box, under the floor, and out the left wing or into the tail. Either conduit or rubber grommets protect the tube as it passes through bulkheads. Having seen old plastic lines become brittle and crumble, I opted for neoprene. Pushing on the connectors is a lot easier too |
| Custom Kitplane Modifications The beauty of experimental airplanes is that we can make custom kitplane modifications without having to go through all of the FAA hassle required by Type Certificated Aircraft. We can just make a change, or bolt in an add-on because it makes sense, or just makes us happy. No Form 337 to fill out, no field approval from the local FSDO, no hassle at all. You have to love it. |
